By pfcequipment|2020-07-02T14:28:56-05:00July 2nd, 2020|Trends|
Fybroc pumps are produced using a Resin Transfer Molding (RTM) process that allows a controlled placement of long strands of fiberglass reinforcement in high stress areas. this allows for a thinner wall structure with optimum corrosion resistance. Critical components
By pfcequipment|2020-07-02T12:27:48-05:00July 2nd, 2020|News|
The e-SV fabricated vertical multi-stage pump is an energy saving, non-priming pump coupled to a standard premium-efficient motor. It’s built to withstand a variety of, mechanically aggressive and high temperature liquids, and is designed to extend uptime and help
By pfcequipment|2020-06-29T12:45:58-05:00June 29th, 2020|News|
Yamada Global AODD Pump G15 1/2" AODD pumps provide a maximum flow rate of 16.6 GPM and are available in Aluminum, Stainless Steel (316), Pure Polypropylene and Kymar. We offer a wide selection of diaphragm materials that cover a variety
By pfcequipment|2020-07-02T12:29:17-05:00June 25th, 2020|News|
The Gould's NPE series end suction centrifugal pump has complete AISI 316L stainless steel liquid handling components and mounting bracket for corrosion resistance. The pump is capable of pumping up to 150 GPM at 3500 RPM and 75 GPM
By pfcequipment|2020-06-25T12:03:28-05:00June 23rd, 2020|Trends|
Single Stage End Suction: The Gould's Model 3656 end suction centrifugal pump offers a close coupled design and the model 3756 offers a bearing frame mounted design, they are both available in all iron or bronze fitted for application
By pfcequipment|2020-06-25T14:58:23-05:00June 23rd, 2020|News|
Yamada Brochure Yamada NDP Pumps - AODD pumps provide a maximum flow rate of 2 to 200 gallons per minute. Pumps are available in cast iron, aluminum, stainless steel (316), and polypropylene construction, with a wide variety of diaphragm materials.
By pfcequipment|2020-06-19T11:07:51-05:00June 19th, 2020|News|
Moyno Brochure Basic Pump Principle Moyno® Sanitary progressing cavity pumps gives you all the benefits of positive displacement but also a unique combination of advantages not found in other positive displacement pumps. The pump contains a helical rotor,
By pfcequipment|2020-06-23T16:03:33-05:00June 12th, 2020|News, Trends|
CR Cool Top pump can handle pumping hot liquids while still delivering the high pressures without any capacity change from the standard CR pump. The Cool Top shaft seal option can operate in a temperature range from 248 F
By pfcequipment|2020-05-28T10:03:05-05:00May 28th, 2020|News|
The chemical industry - similar to much of the manufacturing industry, uses water during the production process. Water may be used for either creating products or cooling equipment used in creating products. Industrial water is used for
