Characteristics

– 4 independent controllable channels
– Continuous pumping or precision dispensing
– Flexibility of bi-directional flow in each channel
– Independent channel calibration minimizes the tube to tube differences resulting in the best calibration accuracy possible in a multichannel peristaltic pump
– New easy-to-use USB interface makes connections quickly
– Windows® software included. Control up to eight REGLO-ICC pumps.
– Time based routines allow for complex experiment development

Flow rates – 0.001 – 35ml/min (per channel)

Channels – 2, 3 or 4

Motor type – Stepper motors

Differential pressure – Max. 1.0 bar (14,5 psi)

Control – PC control or keypad control

Characteristics

– compact multi-channel tubing pump
– for low-flow, multi-channel fluid transfer and dosing or filling applications
– 6, 8 and 12 roller rotors for extremely low pulsation
– 6 operating modes and calibration functions
– MS/CA Click’n’go cassettes providing defined and reproducible occlusion conditions
– remote controllable via PC (RS232)

Flow rates  – 0.001 – 68ml/min (per channel)

Channels  – 2 or 4

Motor type  – DC motor

Speed control  – closed loop control for pressure independent speed

Speed setting  – digital speed setting, resolution 0.1 rpm

Operating panel – 6-button membrane key-pad
– LED display

Remote control – RS232 “in” and “out”
– digital input and analog output

Characteristics

– no LED display
– no calibration functions
– only “Start/Stop”, “Speed” and “Direction”

Flow rates 0.002 – 68 ml/min (per channel)

Speed setting 2-digit potentiometer, 1% steps

Remote control analog interface (no RS232)

Characteristics

– single-channel tubing pump
– easy accessible tube-bed
– higher max. flow rate
– no LED display
– no calibration functions
– only “Start/Stop”, “Speed” and “Direction”

Flow rates 2.1 – 230 ml/min

Channels 1

Speed setting 2-digit potentiometer, 1% steps

Remote control analog interface (no RS232)

Characteristics:

– high-flow tubing pump for accurate and reproducible fluid transfer in laboratories and industry
– rugged stainless steel housing
– accurate and reproducible speed-setting
– closed loop control for pressure independent speed
– interchangeable rotor for lower pulsation or elevated differential pressure
– analog interface

Flow rates  – 1.7 – 5400 ml/min

Characteristics

– 3 rollers providing lower pulsation
– slightly lower maximum flow rate

Flow rates 1.6 – 5000 ml/min

Characteristics

– 3 rollers providing lower pulsation
– reduced flow rate due to smaller tube sizes
– hinged tube-bed with wide opening angle allowing rapid tube change-over
– no interchangeable rotor

Flow rates 0.25 – 1300 ml/min

Characteristics

– 3 rollers
– Easily accessible pump-head
– Allows rapid tube change-over
– PSF housing (Polysulfone)
– stainless steel rotor

Flow rates  – 0.23– 1600 ml/min

Characteristics

– 8-channel pump-head
– Click’n’go cassettes providing defined and reproducible occlusion conditions
– 6 rollers for low pulsation
– takes 3-stop collared tubing
– no interchangeable rotor
– no safety cutout

Flow rates 0.005– 150 ml/min (per channel)

Characteristics

– 4-channel pump-head
– Click’n’go cassettes providing defined and reproducible occlusion conditions
– 12 rollers for low pulsation
– takes 3-stop collared tubing
– no interchangeable rotor
– no safety cutout

Flow rates 0.003– 83 ml/min (per channel)

Characteristics

– powerful, programmable, IP65-rated dispensing pump
– dust-tight and waterproof against water jets from all directions
– no internal corrosion thanks to sealed stainless steel housing
– process suitable with batch programming capabilities
– microprocessor controlled
– memory saves up to 4 sets of operating parameters
– flow rate and volume can be calibrated
– ideal for dosing and filling applications
– remote controllable via PC (RS232)
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads

Flow rates  – < 0.001 – 3700 ml/min

Characteristics

– powerful microprocessor controlled dispensing pump
– memory saves up to 4 sets of operating parameters
– flow rate and volume can be calibrated
– ideal for dosing and filling applications
– remote controllable via PC (RS232)
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads

Flow rates < 0.001 – 3700 ml/min

Characteristics

– powerful IP65-rated washdown pump
– dust-tight and waterproof against water jets from all directions
– no internal corrosion thanks to sealed stainless steel housing
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads

Flow rates< 0.001 – 3700 ml/min

Characteristics

– powerful delivery pump
– bayonet coupling system for 20 interchangeable pump-heads
– pump-heads with 1 to max. 24 channels
– takes also ceramic piston pump-heads

Flow rates < 0.003 – 3700 ml/min

Characteristics

– microprocessor controlled drive
– 11 operating modes and calibrating functions
– extremely low pulsation
– for low-flow, multi-channel fluid transfer and
dosing or filling applications
– flow rate and dispensing volume can be calibrated
– planetary drive for very accurate pumping
– high repeatability on all channels
– 8 actively driven stainless steel rollers
– CA Click’n’go cassettes providing defined and repeatable occlusion conditions
– remote controllable via PC (RS232)
– paint finished stainless steel housing

Flow rates  — 0.0004 – 11 ml/min (per channel) (IPC-N Series)
– 0.002 – 44 ml/min (per channel) (IPC Series)

Characteristics

Same as IPC and IPC-N but

– no dispensing features
– no calibrating functions
– only Run/Stop, Speed Control and Direction

Flow rates – 0.0004 – 11 ml/min (per channel) (IP-N Series)
– 0.002 – 44 ml/min (per channel) (IP Series)

Flow Rate:  1 – 7020 ml/min

Description:
– dispensing and delivery pump
– dust-tight and waterproof
– interchangeable pump-heads
– RS232 and analog interface

Flow Rate: 1 – 7020 ml/min

Description:

– dispensing and delivery pump
– 20 interchangeable pump-heads
– RS232 and analog interface

Flow Rate: 1 – 7020 ml/min

Description:

– variable speed delivery pump
– 20 interchangeable pump-heads
– analog interface

Flow Rate: 1 – 3200 ml/min

Description:

– dispensing and delivery pump
– 15 interchangeable pump-heads
– RS232 interface

Flow Rate: 1 – 3200 ml/min

Description:

– dispensing and delivery pump
– 15 interchangeable pump-heads
– RS232 interface

Flow Rate: 1 – 3290 ml/min

Description:

– variable speed delivery pump
– 15 interchangeable pump-heads
– analog interface

Flow Rate: 1 – 3290 ml/min

Description:

– variable speed delivery pump
– 15 interchangeable pump-heads
– analog interface

Characteristics

– dispensing and delivery pump
– dust-tight and waterproof
– speed range 10.0 .. 1800 rpm
– available with RH and Q-type
..pump-heads
– RS232 and analog interface

Flow rates 0.025 – 2300 ml/min

Characteristics

– dispensing and delivery pump
– RS232 interface
– speed output
– adjustable volume per revolution

Flow rates 0.1 – 180 ml/min

Characteristics

– variable speed delivery pump
– analog interface
– speed output
– adjustable volume per revolution

Flow rates 0.045 – 180 ml/min