The Grundfos Weg motors are equipped with a reinforced bearing system with locked bearings at the drive end, either a deep-groove ball bearing or an angular-contact bearing depending on the motor model.
-
1.5HP | 3600RPM | 1 Phase | 115/208-230 Volts | Weg Motor -
1.5 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
1/2HP | 3600RPM | 1 Phase | 115/208-230 Volts | Weg Motor
-
.5 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
.33HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
1/3HP | 3600RPM | 1 Phase | 115-230 Volts | Weg Motor
-
100 HP | 3600RPM | 3 Phase | 230/460 Volts | Weg Motor
-
10 HP | 3600RPM | 1 Phase | 230 Volts | Weg Motor
-
10 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
15 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
1HP | 3600RPM | 1 Phase | 115/208-230 Volts | Weg Motor
-
1 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
20 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G
-
25 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor
-
2HP | 3600RPM | 1 Phase | 115/208-230 Volts | Weg Motor
-
2 HP | 3600RPM | 3 Phase | 208-230/460 Volts | Weg Motor | Certified Class I Div 2, Groups A, B, C & D; Class II, Div 2, Groups F & G