AJR Bag Filters standard felt with Micron ratings from 1 to 200. All industry standard & custom sizes available. Broad chemical compatibility. High flow/low pressure drop. Sewn or fully-welded construction. Handles on all bags. Choice of steel ring or plastic flange. Temperature ratings to 200ºF (PO), 275ºF (PE ), 425ºF (HT) and 500ºF (Teflon®)
AJR bag filters standard mesh Monofilament & Microfilament. Micron ratings from 1 to 1500. All industry standard and custom sizes available. High flow/low pressure drop media. Surface-retention filtration. Wide chemical compatibility. Sewn construction. Handles standard on all bags. Choice of steel ring or plastic flange. Economical removal of non-deformable contaminants. Non-fiber releasing. Good removal effiencies. Temperature ratings to 350ºF. Polyester and nylon materials meet FDA regulations for contact under CFR21 section 177.1520. Silicone-free construction
-
Sale!
AJR Filtration’s deep pleated filter cartridges provide 99% absolute efficiencies from 1 to 40 microns. A single deep pleated cartridge can replace up to 20 standard filter bags. Optimal application conditions for economical performance: 30 GPM at maximum 25 PSID (Sizes #2) The deep pleat design is secured with stainless steel bands and polyethylene netting. These filters are designed to fit into most existing Size 2 baskets and provide an O-ring side seal without housing modifications. Size #2 length 26" | 1 micron 35 sq-ft of media | Usual lead time 3 weeks -
Qty 1 equals 50 filters per case | #1, 7 x 16 | Glazed Polypro | Polyloc | Welded Seams | 1 Micron -
Qty 1 equals 40 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 1 Micron
-
Qty 1 equals 50 filters per case | #1, 7 x 16 | Glazed Polypro | Polyloc | Welded Seams | 10 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 10 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 100 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 200 Micron
-
Qty 1 equals 50 filters per case | #1, 7 x 16 | Glazed Polypro | Polyloc | Welded Seams | 25 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 25 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 3 Micron
-
Qty 1 equals 50 filters per case | #1, 7 x 16 | Glazed Polypro | Polyloc | Welded Seams | 5 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 5 Micron
-
Qty 1 equals 50 filters per case | #1, 7 x 16 | Glazed Polypro | Polyloc | Welded Seams | 50 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 50 Micron
-
Qty 1 equals 50 filters per case | #2, 7 x 32 | Glazed Polypro | Polyloc | Welded Seams | 75 Micron
-
Sale!
More surface area means the cartridge will last longer than a bag filter, equals less change outs. The unique design of this pleated cartridge provides 5 to 10 times the surface area depending on the micron. Dirt holding capacity and efficiency are maximized by pleating two layers of nominal felt to create a pre-filter and final layer. Size #2 length 26" | 1 micron 25 sq-ft of media | Usual lead time 3 weeks Micron ratings from 1-200, Fits most Size #2 strainer baskets, Polypropylene materials meet FDA regulations for food contact under CFR21, Section 177.1520, Broad Chemical Compatibility, Temperature ratings to 200ºF, Silicone-free construction