-
Sale!
2-HP | BEP 26 GPM @ 70 PSI | 304SS | EPDM-SILCAR-SILCAR |1.25″ FNPT -
Sale!
2-HP | BEP 50 GPM @ 39 PSI | 304SS | EPDM-SILCAR-SILCAR |1.5″ FNPT
-
Sale!
2-HP | BEP 110 GPM @ 36 PSI | 304SS | EPDM-SILCAR-SILCAR |2″ FNPT -
Sale!
1.5-HP | BEP 22 GPM @ 41 PSI | 304SS | EPDM-SILCAR-SILCAR |1.5″ FNPT
-
Sale!
1.5-HP | BEP 40 GPM @ 42 PSI | 304SS | EPDM-SILCAR-SILCAR |1.5″ FNPT
-
Out of stock
MQ is obsolete, replaced by the Scala1 3-45 Max inlet pressure 40 psi. Pump starts when flow rate is greater than 0.3 gpm or pressure is below 29 psi. Pump stops-Only the flow switch is authorized to automatically stop the MQ during normal operation when flow drops below 0.3 gpm. The pump will shut off in 12-15 seconds after flow stops. Maximum height of tap is 50' The MQ-35 is a complete, all-in-one unit, incorporating pump, motor, diaphragm tank, pressure and flow sensor, controller and non-return valve. -
200 GPM @ 115 FTH Best Efficiency Point | Ansi Class 125lbs, 2.5" x 1.50" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM -
1150 GPM @ 310 FTH Best Efficiency Point | Ansi Class 125lbs, 4" x 3" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460V, 3600RPM
-
1500 GPM @ 235 FTH Best Efficiency Point | Ansi Class 125lbs, 5" x 4" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/460V, 3600RPM
-
150 GPM @ 165 FTH Best Efficiency Point | Ansi Class 125lbs, 2" x 1.25" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM
-
175 GPM @ 175 FTH Best Efficiency Point | Ansi Class 125lbs, 2.5" x 1.50" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM
-
265 GPM @ 120 FTH Best Efficiency Point | Ansi Class 125lbs, 2.5" x 2" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM
-
370 GPM @ 100 FTH Best Efficiency Point | Ansi Class 125lbs, 3" x 2.5" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM
-
500 GPM @ 75 FTH Best Efficiency Point | Ansi Class 125lbs, 4" x 3" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460V, 3600RPM
-
250 GPM @ 175 FTH Best Efficiency Point | Ansi Class 125lbs, 2.5" x 1.50" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM
-
280 GPM @ 170 FTH Best Efficiency Point | Ansi Class 125lbs, 2.5" x 1.50" | Lifetime of no shaft alignments | Wetted Material: Cast Iron-Stainless-EPDM | 3/60/230-460, 3600RPM